Package include: 1 Mother Board Only (nothing else)

PRODUCT:  INTEL D102GGC2 ATX P4 775 MOTHERBOARD FSB 800 4 SATA

Description:  Desktop Board D102GGC2, Socket 775, ATI RADEON XPRESS 200, 800 MHz, Micro-ATX, LAN, VGA, LYD, PCIexpress, DDR2-RAM
Intel® Desktop Board D102GGC2 Features n.

Processors Support for an Intel® Pentium® D processor in an LGA775 socket with an 800 or 533MHz system bus
Support for an Intel® Pentium® 4 processor in an LGA775 socket with an 800 or 533MHz system bus
Support for an Intel® Celeron® D processor in an LGA775 socket with a 533MHz system bus
View all supported processors
Chipset ATI Radeon Xpress 200 Chipset
Memory Two 240-pin DDR2 SDRAM Dual Inline Memory Module (DIMM) sockets Support for DDR2 533MHz and DDR2 400MHz DIMMs Support for up to 2GB of system memory
Video Integrated ATI Radeon X300 based graphics
Audio High Definition Audio subsystem using the Realtek* ALC883 audio codec
I/O Control SMSC* SCH5017 Legacy I/O controller for hardware management, diskette drive, serial, parallel, and PS/2* ports
LAN Support 10/100 Mbits/sec LAN subsystem using the Realtek 8101L LAN adapter device
Peripheral Interfaces Eight USB 2.0 ports, One serial port, One parallel port, Four Serial ATA interfaces
Two Parallel ATA IDE interfaces with UDMA 33, ATA-66/100 support
One diskette drive interface
PS/2 keyboard and mouse ports
Expansion Capabilities Two PCI Conventional* bus connectors One PCI Express * x16 bus add-in card connector One PCI Express x1 bus add-in card connectors

 

 

A - PCI Conventional* bus add-in card connector 2 
B - PCI Conventional bus add-in card connector 1
C -  Front panel audio connector
D - PCI Express* x1 bus add-in card connector
E - PCI Express x16 bus add-in card connector
F - Rear chassis fan connector
G - +12V power connector (ATX12V)  
H - Processor fan connector
I - Chassis intrusion connector
J -Main power connector
K -Diskette drive connector
L - Primary parallel ATA IDE connector
M -Secondary parallel ATA IDE connector
N - Serial ATA connector 1
O - Front chassis fan connector
P - Serial ATA connector 2  
Q - Serial ATA connector 4
R -  Serial ATA connector 3  
S - Auxiliary front panel power LED connector
T - Front panel connector
U - Front panel USB connector

V - Front panel USB connector

A - PS/2* mouse port (Green)
B - PS/2 keyboard port (Purple)
C - Parallel port (Burgundy)
D - Serial port A (Teal)
E - VGA port
F - USB ports [4]
G - LAN
H - Line in or Rear Left/Right Out
I -  Line out or Front Left/Right Out
J  - Mic in or Center/LFE (Subwoofer) Out

DIMENSION: Form Factor micro ATX (9.60 inches by 8.60 inches [243.84 mm by 218.44 mm])

I/O PANEL PLATE NOT INCLUDED
 

The Specifications

1 socket 775 CPU Interface

Model: D102GGC2

2 PCI SLOTS

2 RAM BUS slots supporting

1 NIC

On board sound

4 USB Connectors

2 Serial/1 Parallel

2 PS2

ATX Form Factor

COMPATIBLE #
AA # BTGC633016VE AA D42789-204

For downloads, Manual, info:

Payment: Paypal, (Cash only if Wants to pickup with appointment only)

Please you must add Insurance charges with shipping while paying.)

COMBINED SHIPPING:  Item DOES NOT qualify for multiple item shipping discount.

Pickup Location terms can be change any time without any further notice

Please contact us for pickup information with your contact no. Pickup payment should be cash only.

Item can be reach to you not before as follows:-

- Domestically (within Canada): 4 - 10 business days.
- Within North America (including most US continental destinations): 8 - 15 business days
 

> We are charging for handling that can include in Shipping charges.
> Buyer is responsible for custom or duty fee if any.
> Buyer is responsible for all the Shipping and Handling or return shipping charges.
> Shipping or Pickup charges are none refundable
> If you are not agreed on terms stated on this page please do not buy.
> Item can be shipped only after full payment made.
> You can pay by money order, personal check etc.