|
|
|
|
|

|
|
ATMega 128
w/programmer
· Item:
ATMega 128
w/programmer
· Our Price: $29.99
· Description:
The black card has
an 18.000 MHz XTAL (this is ideal to communicate with the receiver).
This design is made by the famous EFA. Please note that this is the only
card that can be upgraded to married sub in the future. All other cards
might not be compatible with married sub because the standard and the
pin-out will be chosen by coders working with EFA, so the other dealers
have no idea yet about the married sub.
|
ATMega 128
w/programmer
|
|
|

SATE-DG6800 + CAB-DB9FF |
DIGIWAVE DG6800 FREE TO AIR SATELLITE RECEIVER
WITH REMOTE CONTROL
à GET A NULL SERIAL
CABLE FOR FREE (REG: $9.99)
No
access cards, No subscriptions, Just free TV
|
$169.00
|
|

SATE-VP1022A +
SATE-SWI-GD-41 |
TWINHAN VISIONPLUS 1022A PCI SATELLITE CARD
WITH REMOTE CONTROL
à GET DIGIWAVE 4X1
DISEQC SWITCH FREE (REG: $12.00)
Watch and record FTA satellite TV on
your PC
No
access cards, No subscriptions, Just free TV
|
$89.00 |
|

SATE-MOTOR-SG21 |
MOTECK DIGIPOWER SG2100 HH DISH MOTOR
à Motorize your antenna,
DiSEqC 1.2 motorized H-H Mount, It fits Winegard 76cm dishes
|
$99.00 |
|

SATE-DGHH990 |
DIGIWAVE DISH MOTOR HH688 DISH MOTOR
à Motorize your antenna,
DiSEqC 1.2, 1.3 (Stab Usals) Motorized H-H Mount, It fits Winegard
76cm dishes
Fits all popular
dish with 42mm tube, including Winegard Special Design for any
Receiver with DiSEqC 1.2, Only one Coaxial Cable Control |
$99.00 |
|

SATE-DISH-18 |
ARIZA TECHNOLOGY 18” INCH SATELLITE DISH
ANTENNA
|
$49.00 |
|

SATE-DISH-24 |
MULTI-SATELLITE DISH ANTENNA ELLIPTICAL 24”
à
An
18" x 23" multi-satellite dish that is compatible with all DIRECTV
satellite receivers. The TRK-S23 is a double LNB satellite dish
antenna that can be upgraded to a triple LNB dish with TERK’s Sat C
Kit (LNB-CBP) to receive HDTV broadcasts and local-to-local in some
markets. The integrated 5x4 Multiswitch makes it easy to connect the
dish to up to 4 receivers, improving wire management and saving
time. TERK satellite dish antennas are designed and engineered to
stand up to the severest of weather and atmospheric weather
conditions without rusting. If wind is a concern there's no reason
to worry. TRK-S23 can withstand 50 - 75 mph winds |
$132.00 |
|

SATE-DISH-33 |
ARIZA TECHNOLOGY 33” SATELLITE DISH
ANTENNA |
$79.00 |
|

SATE-SWI-GD-41 |
DIGIWAVE 4X1 DISEQC SWITCH
àThis DiSEqC 2.0 switch
will allow you to connect up to 4 satellite dishes (LNB’s) to your
FTA receiver. This switch is a must have if you have more than one
satellite dish! |
$12.00 |
|

SATE-FINDER992 |
SATELLITE FINDER
à Satellite finder with
audio tone |
$20.00 |
|

SATE-MOUNT |
Multi
LNBs Mount for satellite dish
|
$15.00 |
|

CAB-DB9FF |
SERIAL CABLE RS232 DB9 F-F NULL CABLE
à Serial cable DB9 F-F
null cable from PC to Receiver (Good for DIGIWAVE DG6800) |
$9.99 |
|

CAB-DB9FF-STRAIGHT |
SERIAL CABLE RS232 DB9 F-F STRAIGT THROUGH
CABLE
à Transfer data from PC
to Receiver (good for Pansat, Fortec, Sbox) |
$9.99 |
|

SATE-ADP-F56 |
F56
GSO CABLE CONNECTOR NO “O” RING
WIREWORKS “F”
CONNECTOR WITHOUT “O” RING & SILICON GEL FOR RG6
100PCS PER BAG |
$20.00 |
|

ACC-COAX-STRIPP |
CT-332 COAX CABLE STRIPPER
|
$12.00 |
|

ACC-COAX-TOOL |
XOAX
CRIMPING TOOL FOR RG-6, RG-58
|
$25.00 |
|

SEC-CAB-1000 |
1000FT SHIELDED DIGITAL RG6 CABLE |
$69.00 |
|

SATE-CABLECLIP |
CABLE
CLIPS 8MM/ 100PCS PER BAG
|
$7.00 |
|

SATE-RCA-KIT |
RCA
SATELLITE DISH INSTALLATION KIT
à All you need to
install satellite dish antenna. Hardware and installation guidance
This kit has
everything you need except tools, and a ladder!
·
Detailed Installation & trouble shooting guide.
·
Step-by-step Installation Video!
·
Toll Free Helpline!
·
1
RG-6 coaxial cable (UL type) with weatherproof "F" connectors 25
ft.
·
1
RG-6 coaxial cable (UL type) with weatherproof "F" connectors and
attached 17 AWG copper clad grounding wire 75 ft.
·
1
Tube silicon sealant.
·
6
Cable anchors.
·
4
Zip cable ties.
·
1
Dual grounding block
·
1
Compass (to aim your dish)
·
1
#8 AWG aluminum grounding wire.
Hardware
Bag Contains:
·
2
lag screws 3" x 5/16"
·
2
lag screws 3" x 1/4"
·
4
lag screws 2" x 5/16"
·
4
machine screws 3" x 5/16"
·
4
double expansion anchors 5/16"
·
4
washers 5/16"
·
1
hex cap screw 1/2" x 1/4"
·
1
tooth lock washer 1/4"
·
1
nut with nylon insert 1/4" |
$15.00 |
|
|
|
|
|
============================================================
|
Welcome
To Auctions EVERY
Tuesday 6:00 pm NEW STUFF
LOTS OF GOOD DEALS
Cordless
phones, Microwave, Electronics,
House hold, TV Stand, Lamp, Bed, Chair, Table, Art,
COMPUTER'S PARTS AND ACCESSORIES
DESKTOP COMPUTERS, LAPTOP COMPUTERS
NOTEBOOK PARTS,
Consignments are welcome
|
|